There are two questions that should be considered when choosing the right boat: "What will be the fishing for?" and "where will the fishing activities be?" Always look for the signs of quality check the carpet and the compartments - they could be plastic, metal or fiberglass. Look at the little but very important things like the 1000 GPH bilge pump, the six gauge wiring instead of ten or eight that is because heavier wires gives more power from the battery up to the trolling motor.
There is Five Star Advantage that ranger dealers often speak to their customers: Quality, Safety, Innovation, Performance, and Value. Below is a list of “must have” things when buying your first boat.
Tow Vehicle - This is one of the most important piece of your equipment, ensured that has the rating to get the job done like loading up to 3500 lbs. of weight that could easily pull the boat up the hills and mountainous treks.
Bass Boats - For first timers, consider a second hand boat. This will be a trial and error stage where fishing skills can be tested. Consider a larger boat, which is about 19 feet with 20 to 30 miles speed for larger bodies of water.
Aluminum - In smaller lakes, a 16-18 foot aluminum boat is a good choice. It is cheaper than fiberglass and more forgiving of bangs, running up into shallows and hitting stumps and rocks. The only downside is that it rides rougher even with the slightest winds.
Fiberglass - This two-stroke engine is much more expensive which could cost from $20,000 to as much as $50,000. The good thing with this boat is that it could handle bigger, rougher water and still give you a smooth ride.
Brand new versus Second Hand - Buying a second hand boat is not only cheaper but holds their value longer and better. The downside is that you'll probably inherit someone else's troubles. During casual inspection, outboard engines problems are not easily identified. The best thing to do is bring someone you trust with you to inspect a prospective boat or buy from someone you know instead.
Handling the Boat - Listen to the pitch change when trimming down. Although it will be very difficult for beginners like trying to launch and retrieve the boat backing it down the ramp. Never worry, because everyone passed that stage and there's no boat owner that is not willing to help a first timer learn. Sometimes all it takes is just 4 hours to learn the basics.
Buying a dreamboat is very exciting. It is not the boat that really matters but the experiences that come with fishing.
Sabtu, 30 Agustus 2008
Rabu, 27 Agustus 2008
Catfishing the Right But Simple Way
There are a few basic methods that are effective in catching catfish. Bear in mind that specific methods are applicable to specific kinds of waters. That is because techniques and baiting mixtures are formulated for specific targets.
The following methods are simple, yet proven successful when used:
1) Rigging method - Depending on the bait used, loop the bait holder or the treble hook from a line to a preferred distance to the end. Bait movement is not suggested; therefore, a weight must be used to allow the rig to be still. A good distance shall be about 18" to 24."
Same as the first method, using the Slipweight to make the bait stable is also effective. The weight does not matter as long as it can slide in the line. The fish will not feel any weight and it will be late until they realize that the bait is fake.
Multibait technique allows multiple catches at once. Simply place three-way swivel along the line. As it draws more strikes it makes a great choice for catching more catfish at the same time.
2) Bait - Experts opt for chicken livers or medium sized shrimp from groceries. The shrimp's tail and skin must be removed and body should be big enough to slide up in a number 6 hook. This is simpler than the chicken which necessitates the use of pantyhose. A diameter of a quarter is wrapped in a piece of pantyhose leaving a tag end then attach it through the treble hook. Blood worms, minnows, catfish paste, night crawlers, snails, living or dead small fish, and dough baits are also good choices of baits. Remember that the best baits are always those that nature produced.
3) Chumming - Fishermen catch more catfish with this method. This is simply throwing balls of mixtures of natural recipes in the fishing area. This attracts more catfish; the trick is that the mixture should be right enough for the catfish to feed heavily. The hook that will be used to fish normally must have the same recipe for the bait. Adding a good smelling flavor into the pasty mixture attracts catfish more.
4) Tackling - Although the technique involved in this method is by far effective, it's still the bait that attracts and brings the catfish in. As simple as it is, the tackle should be about 6 feet long with a spinning real. Choose heavier lines to allow more battle between the fisherman and the catfish. It doesn't necessarily have to be expensive. The experience you get from a cheaper tackle is no different from an expensive one.
Make sure the grip is secure hooks are removed by pliers after catching the fish. Avoid being stuck with the fins as some are poisonous. Just simply sliding the hand up to its belly from tail, placing the fingers behind one side and thumb behind the other can remove the catfish from the hook without any harm. Happy catfishing and good luck!
The following methods are simple, yet proven successful when used:
1) Rigging method - Depending on the bait used, loop the bait holder or the treble hook from a line to a preferred distance to the end. Bait movement is not suggested; therefore, a weight must be used to allow the rig to be still. A good distance shall be about 18" to 24."
Same as the first method, using the Slipweight to make the bait stable is also effective. The weight does not matter as long as it can slide in the line. The fish will not feel any weight and it will be late until they realize that the bait is fake.
Multibait technique allows multiple catches at once. Simply place three-way swivel along the line. As it draws more strikes it makes a great choice for catching more catfish at the same time.
2) Bait - Experts opt for chicken livers or medium sized shrimp from groceries. The shrimp's tail and skin must be removed and body should be big enough to slide up in a number 6 hook. This is simpler than the chicken which necessitates the use of pantyhose. A diameter of a quarter is wrapped in a piece of pantyhose leaving a tag end then attach it through the treble hook. Blood worms, minnows, catfish paste, night crawlers, snails, living or dead small fish, and dough baits are also good choices of baits. Remember that the best baits are always those that nature produced.
3) Chumming - Fishermen catch more catfish with this method. This is simply throwing balls of mixtures of natural recipes in the fishing area. This attracts more catfish; the trick is that the mixture should be right enough for the catfish to feed heavily. The hook that will be used to fish normally must have the same recipe for the bait. Adding a good smelling flavor into the pasty mixture attracts catfish more.
4) Tackling - Although the technique involved in this method is by far effective, it's still the bait that attracts and brings the catfish in. As simple as it is, the tackle should be about 6 feet long with a spinning real. Choose heavier lines to allow more battle between the fisherman and the catfish. It doesn't necessarily have to be expensive. The experience you get from a cheaper tackle is no different from an expensive one.
Make sure the grip is secure hooks are removed by pliers after catching the fish. Avoid being stuck with the fins as some are poisonous. Just simply sliding the hand up to its belly from tail, placing the fingers behind one side and thumb behind the other can remove the catfish from the hook without any harm. Happy catfishing and good luck!
Senin, 25 Agustus 2008
Basic Carp Fishing Pointers
Frustrating as it is, carp fishing is awesome. Carp are really good at sucking in and blowing out suspicious baits. It’s such an excitement to see the whole action in a fraction of a second as you hang on for dear life while the reel is trembling with a loud noise.
Carp happily devour on the surface as long as you keep the pellets, biscuits, chic peas, bread, and re-hydrated corn coming in, and these are inexpensive baits as well. Just attach them to the hooks, most preferably the bread. Have the biscuits softened by dipping it in the water for about 2 minutes, then, place them in a sealed sandwich bag for about an hour. Since different brands have different textures, just experiment to know which is firm enough to cast. Another way to hook baits is super gluing the pellet into the shank.
Once they get into feeding, let them feel comfortable around the bait. This gives more opportunity for the fisherman since they begin to not feel picky. This tactic can be useful for zig rigs.
As soon as they’re feeding, cast the bait but make sure not to drop the bait directly onto the feeding carp. Cast away from the feeding area then slowly draw it in position. While the bait is till hanging, keep the food coming in so as to keep the carp from going away.
How to Set-Up?
• Use a hair rig to increase your chance of catching. As carp taste food first, if they don’t like the taste, they won’t come near it.
• You may also use a Spider Line, 50 lbs test, then use a leader material that fits the situation.
• Thread the bait on the baiting needle and hook the hair loop. You may also use foam dipped in a flavor as this enhances the attractiveness of the bait.
• Also make a baiting needle by just straightening a long shank hook. Slide the bait on the shank, then slide the bait from the needle onto the hair.
• Using a float is also an advantage because it adds weight for further distancing and the location is easily identified.
• Don’t forget the controller float rig. A leader can be used which is attached to the swivel to its mainline of at least 3 feet length with a 10lbs Drennan double strength. A low diameter mono will do just as long as it floats well enough for visibility.
As experts say, it is not the bait that catches the carp but the method in which the bait is introduced. Pre-bait everyday, in one spot for a few days. This makes the carp think that there is a regular source of food for them and by “word of mouth” there’ll soon be a school of fish around. Just be patient and it will all work.
Carp happily devour on the surface as long as you keep the pellets, biscuits, chic peas, bread, and re-hydrated corn coming in, and these are inexpensive baits as well. Just attach them to the hooks, most preferably the bread. Have the biscuits softened by dipping it in the water for about 2 minutes, then, place them in a sealed sandwich bag for about an hour. Since different brands have different textures, just experiment to know which is firm enough to cast. Another way to hook baits is super gluing the pellet into the shank.
Once they get into feeding, let them feel comfortable around the bait. This gives more opportunity for the fisherman since they begin to not feel picky. This tactic can be useful for zig rigs.
As soon as they’re feeding, cast the bait but make sure not to drop the bait directly onto the feeding carp. Cast away from the feeding area then slowly draw it in position. While the bait is till hanging, keep the food coming in so as to keep the carp from going away.
How to Set-Up?
• Use a hair rig to increase your chance of catching. As carp taste food first, if they don’t like the taste, they won’t come near it.
• You may also use a Spider Line, 50 lbs test, then use a leader material that fits the situation.
• Thread the bait on the baiting needle and hook the hair loop. You may also use foam dipped in a flavor as this enhances the attractiveness of the bait.
• Also make a baiting needle by just straightening a long shank hook. Slide the bait on the shank, then slide the bait from the needle onto the hair.
• Using a float is also an advantage because it adds weight for further distancing and the location is easily identified.
• Don’t forget the controller float rig. A leader can be used which is attached to the swivel to its mainline of at least 3 feet length with a 10lbs Drennan double strength. A low diameter mono will do just as long as it floats well enough for visibility.
As experts say, it is not the bait that catches the carp but the method in which the bait is introduced. Pre-bait everyday, in one spot for a few days. This makes the carp think that there is a regular source of food for them and by “word of mouth” there’ll soon be a school of fish around. Just be patient and it will all work.
Kamis, 21 Agustus 2008
BEST LURES TO USE IN FISHING
The evolution of fishing gear and accessories along with the development of the bass fishing industry brought about the development of various lures specifically used for different fish species.
There are many types or class of lures and they all depend on what type of fish works for them. Many only work for specific types but some cover a wide range of species of fish.
Below are some of the typical lures used for fishing.
Light Standard Casting Lures
For Standard casting lures, they are mostly able to attract a wide range of fish varieties from albacore, bluefish, bonita, oho and crappies. These lures are also excellent for certain species of bass fish and work best when retrieved from water at low to medium speed. They pass through water with undetectably synthetic material.
Their sizes are excellent for lightweight fish and a host of freshwater species. They range from 1/16 oz. to 3 oz.
The hand painted eye is enticing enough to allow schooling of fish. This feature allows for more chances of trapping one of the target fish in the water.
Heavy Standard Casting Lures
Heavy Standard Casting Lures are excellent for quite heavy fish specifically, walleye and bass. While the lightweight lures are used in most circumstances, it was shown that heavy counterparts provide more reliable fishing output.
Moreover, the heavy standard lures are able to catch fish than diamond and light standard casting lures.
Long Casting/Jigging Lures
Perhaps the most popular among the fishing lures are the long, tapered jigging lures. They are perhaps the most commonly used fishing lures among the fishermen in Florida, Mississippi and Louisiana.
Just recently, it was found out that the long casting lures work best for catching trout and pike. They were also found to effectively catch stripers and bluefish. They can catch tuna and walleye in a breeze!
Unlike heavy standard lures, this gear won’t produce good fish-catch output up to 180-200 ft under water but be sure to effectively match your lure color, bait and related accessories to maximize performance.
Deadly Diamond Lures
These lures are one of the smallest with sizes ranging from 1/8 to 1oz. They can seamlessly attract attention among fish and could form a school of fish in a minute!
The reason is it lies on its structural surface formation and cut. The top handle is cut like a diamond and causes the reflection of light striking on its surface. The diamond lures are best for catching bass fish varieties, crappie and stripers although they work on a small range of fish species.
There are many types or class of lures and they all depend on what type of fish works for them. Many only work for specific types but some cover a wide range of species of fish.
Below are some of the typical lures used for fishing.
Light Standard Casting Lures
For Standard casting lures, they are mostly able to attract a wide range of fish varieties from albacore, bluefish, bonita, oho and crappies. These lures are also excellent for certain species of bass fish and work best when retrieved from water at low to medium speed. They pass through water with undetectably synthetic material.
Their sizes are excellent for lightweight fish and a host of freshwater species. They range from 1/16 oz. to 3 oz.
The hand painted eye is enticing enough to allow schooling of fish. This feature allows for more chances of trapping one of the target fish in the water.
Heavy Standard Casting Lures
Heavy Standard Casting Lures are excellent for quite heavy fish specifically, walleye and bass. While the lightweight lures are used in most circumstances, it was shown that heavy counterparts provide more reliable fishing output.
Moreover, the heavy standard lures are able to catch fish than diamond and light standard casting lures.
Long Casting/Jigging Lures
Perhaps the most popular among the fishing lures are the long, tapered jigging lures. They are perhaps the most commonly used fishing lures among the fishermen in Florida, Mississippi and Louisiana.
Just recently, it was found out that the long casting lures work best for catching trout and pike. They were also found to effectively catch stripers and bluefish. They can catch tuna and walleye in a breeze!
Unlike heavy standard lures, this gear won’t produce good fish-catch output up to 180-200 ft under water but be sure to effectively match your lure color, bait and related accessories to maximize performance.
Deadly Diamond Lures
These lures are one of the smallest with sizes ranging from 1/8 to 1oz. They can seamlessly attract attention among fish and could form a school of fish in a minute!
The reason is it lies on its structural surface formation and cut. The top handle is cut like a diamond and causes the reflection of light striking on its surface. The diamond lures are best for catching bass fish varieties, crappie and stripers although they work on a small range of fish species.
Selasa, 19 Agustus 2008
Excellent Fishing Rods for that Perfect Fishing Experience
Today’s fishing rods have incorporated modern features that are not typical of the more primitive cane pole. Modern fishing rods contain reels, which aid in the retrieval of fish caught in its bait.
A much-sophisticated feature is the spinning rod where the entire shaft of the rod except the handle can move around on its axis to allow flexibility when fish caught on snare bait struggles through the water.
Like the classic cane fishing rods, the fishing gadget is thick at the handle (bottom) and is tapered and thinner at the tip. This very basic design allows handling stability and flexible movement of the entire length of the shaft.
Types of Fishing Rods and Specifications
A typical fishing rod measures 6 and 16 feet (2 and 5 m) and vary in capability to tolerate strain in fishing activity. The length has a lot to do with withstanding force exerted by the fish to the pole and determines for the most part the performance of rods used for angling.
Cane Poles
Cane poles are one of the smallest and less sophisticated gadgets in fishing. It is usually made of bamboo or other flexible wood material with the most basic fly line attached to it.
Unlike other more sophisticated fishing rods, cane poles do not usually contain reels or its equivalent to be used for reeling in or retrieving fish caught on bait. This very same action is known as angling.
Spinning Rods
These types of rods are the most popular today. They can be used either for heavyweight or lightweight fish although they were proven best for trout, walleye and bass fish. They vary in measurements from 5 and 7 feet (1.5 and 2.5 m).
Spinning poles are commonly used in bass fishing competition accounting for their flexibility and tolerance to stress. They accommodate bigger and tougher fly lines and stabilize them to avoid line tangles during uncoiling of float lines.
Jigging Rods
These rods are best for heavy lures and baits especially when reaching around 180 to 200 feet under the ocean’s surface. They are made of fine, solid materials which accounts to their heaviness. The use of jigging rods is specifically due to alternating currents during the fishing activity.
Some oceans have erratic undersea current. That is why the bait and fly lines should be kept in place. Lures are also disturbed and cause confusion among fish if the lines are not long and heavy enough to withstand and tolerate water currents under the sea.
These rods are best for target fishes usually found dwelling at the bottom of the sea such as halibut and cods.
A much-sophisticated feature is the spinning rod where the entire shaft of the rod except the handle can move around on its axis to allow flexibility when fish caught on snare bait struggles through the water.
Like the classic cane fishing rods, the fishing gadget is thick at the handle (bottom) and is tapered and thinner at the tip. This very basic design allows handling stability and flexible movement of the entire length of the shaft.
Types of Fishing Rods and Specifications
A typical fishing rod measures 6 and 16 feet (2 and 5 m) and vary in capability to tolerate strain in fishing activity. The length has a lot to do with withstanding force exerted by the fish to the pole and determines for the most part the performance of rods used for angling.
Cane Poles
Cane poles are one of the smallest and less sophisticated gadgets in fishing. It is usually made of bamboo or other flexible wood material with the most basic fly line attached to it.
Unlike other more sophisticated fishing rods, cane poles do not usually contain reels or its equivalent to be used for reeling in or retrieving fish caught on bait. This very same action is known as angling.
Spinning Rods
These types of rods are the most popular today. They can be used either for heavyweight or lightweight fish although they were proven best for trout, walleye and bass fish. They vary in measurements from 5 and 7 feet (1.5 and 2.5 m).
Spinning poles are commonly used in bass fishing competition accounting for their flexibility and tolerance to stress. They accommodate bigger and tougher fly lines and stabilize them to avoid line tangles during uncoiling of float lines.
Jigging Rods
These rods are best for heavy lures and baits especially when reaching around 180 to 200 feet under the ocean’s surface. They are made of fine, solid materials which accounts to their heaviness. The use of jigging rods is specifically due to alternating currents during the fishing activity.
Some oceans have erratic undersea current. That is why the bait and fly lines should be kept in place. Lures are also disturbed and cause confusion among fish if the lines are not long and heavy enough to withstand and tolerate water currents under the sea.
These rods are best for target fishes usually found dwelling at the bottom of the sea such as halibut and cods.
Minggu, 17 Agustus 2008
Tips in fishing for salmons in Alaska
Alaska is known as one of the most bountiful areas with salmon, and is ideal for fishing trips.
This is because of extreme tides along the West Coast and the gush of ocean currents that create an environment ideal for the breeding of thousands of baitfish.
It is also known as one of the best places to go if one wants to fish for giant King Salmon, the largest specie of salmon fish.
The best way to catch these giant salmon (in saltwater) is through trolling or by angling a baited line drawn into the water.
Fishing for giant King Salmon can be a year round activity (especially in Seward).
The most sought-after species of salmon are the following:
1. The King Salmon (Chinook) are the largest of all these species. Its weight averages between 20-40 pounds, the heaviest recorded of which is 112 pounds, and can be as long as 3-4". It has a blue-green back that is lightly spotted.
The average life span of a Chinook Salmon is about five to seven years.
Its flesh can range in color from ivory white to a deep red.
Common names for this specie of salmon include tyee, springs, mouth/kings quinnat and tule.
2. Silver Salmon (Coho) on the other hand is slightly smaller with an average weight of 8-12 pounds.
These specie prefer small streams in which to spawn between the months of July to November.
3. Sockeye salmon, on the other hand, are the most sought-after of its entire species because its flesh has a color of deep red and it has a firm rich flavor.
In fishing for salmon in Alaska, one has to be well equipped with the right equipment (and donned with the appropriate apparel).
Listed below are some of the needed equipment/materials and tips for hassle-free fishing:
1. You must be clad in layers of warm clothes (not necessarily bulky ones as it can hinder in the fishing activity).
2. Over these everyday clothes, a waterproof overall, boots and bibs are likewise necessary to ensure that one would stay dry since after a hook-up, some fish may resist with maximum struggles.
3. Fleet or cruisers that offer services for fishing are usually stocked with bait.
4. A guide on board a cruiser ensures that even amateur fishermen will enjoy the activity by providing crash-lessons onboard. They usually hook the bait for the guest and inform the party as to where specific species of fish may thrive for selective fishing.
This is because of extreme tides along the West Coast and the gush of ocean currents that create an environment ideal for the breeding of thousands of baitfish.
It is also known as one of the best places to go if one wants to fish for giant King Salmon, the largest specie of salmon fish.
The best way to catch these giant salmon (in saltwater) is through trolling or by angling a baited line drawn into the water.
Fishing for giant King Salmon can be a year round activity (especially in Seward).
The most sought-after species of salmon are the following:
1. The King Salmon (Chinook) are the largest of all these species. Its weight averages between 20-40 pounds, the heaviest recorded of which is 112 pounds, and can be as long as 3-4". It has a blue-green back that is lightly spotted.
The average life span of a Chinook Salmon is about five to seven years.
Its flesh can range in color from ivory white to a deep red.
Common names for this specie of salmon include tyee, springs, mouth/kings quinnat and tule.
2. Silver Salmon (Coho) on the other hand is slightly smaller with an average weight of 8-12 pounds.
These specie prefer small streams in which to spawn between the months of July to November.
3. Sockeye salmon, on the other hand, are the most sought-after of its entire species because its flesh has a color of deep red and it has a firm rich flavor.
In fishing for salmon in Alaska, one has to be well equipped with the right equipment (and donned with the appropriate apparel).
Listed below are some of the needed equipment/materials and tips for hassle-free fishing:
1. You must be clad in layers of warm clothes (not necessarily bulky ones as it can hinder in the fishing activity).
2. Over these everyday clothes, a waterproof overall, boots and bibs are likewise necessary to ensure that one would stay dry since after a hook-up, some fish may resist with maximum struggles.
3. Fleet or cruisers that offer services for fishing are usually stocked with bait.
4. A guide on board a cruiser ensures that even amateur fishermen will enjoy the activity by providing crash-lessons onboard. They usually hook the bait for the guest and inform the party as to where specific species of fish may thrive for selective fishing.
Jumat, 15 Agustus 2008
BASS FISHING FACTS AND MORE
Bass fishing has a fascinating history. It started in the late 18th century and continues to progress until today.
It probably was originally practiced in search for food among the people in the south of the United States. Since then, it has started gaining numerous audiences of all ages and nations. Today, countries such as Australia, Cuba, South Africa, United States and most of Europe participate in this kind of event.
Timelines
• The year 1768 or 1770 represents the birth of bass fishing sports. Onesimus Ustonson introduced his first multiplying reels to the fishing gurus and lovers. It was later developed into bait caster.
• William Shakespeare Jr. materializes the production of a level wind device and secured its patent on 1897.
• The William J. Jamison Co introduced the overly ornamented Shannon Twin Spinner in 1915 and was improved to create today’s spinner baits.
• In 1932, President Franklin D. Roosevelt instituted the creation of Tennessee Valley Authority and encouraged the creation and building of numerous dams. These dams were later used for culturing different varieties of bass fishes.
• Five years later, DuPont Company filed patent for nylon fishing net, this was later developed into nylon monofilament fishing line.
• The year 1992 is one of the most glorious events in the history of bass fishing. Larry Nixon, the famous fisherman in the history of bass fishing won $1 M total earnings for this sport on this year.
Bass Fish
Several fish species that are being caught in the bass fishing events are the following:
• Micropterus salmoides (Lacepede) - Largemouth Bass
• Micropterus dolomieui - Smallmouth bass
• Micropterus punctatus - Kentucky Bass
Other species of Micropterus are also caught but one that remains popular is the Largemouth bass. However, it should be emphasized that Australian Bass are different from the above North American Bass variants although most share similar features.
Perhaps, the most robust success of Bass Fishing was in the 1950s. The popularity of the game during this period is the springboard to the development of modern fishing equipments from bass boats, rods, lines, lures and various fishing gears.
Electronic gears were also incorporated among the host of equipments bass fishers used at that time. Reels of different types, which function in hauling and hoisting, were also created.
The contribution of bass fishing industry to the US economy records $50 to $70 Billion and the number continues to grow. Statistics show that the audience base of this sport is increasing and that more and more people are getting interested in it compared to tennis and golf.
It probably was originally practiced in search for food among the people in the south of the United States. Since then, it has started gaining numerous audiences of all ages and nations. Today, countries such as Australia, Cuba, South Africa, United States and most of Europe participate in this kind of event.
Timelines
• The year 1768 or 1770 represents the birth of bass fishing sports. Onesimus Ustonson introduced his first multiplying reels to the fishing gurus and lovers. It was later developed into bait caster.
• William Shakespeare Jr. materializes the production of a level wind device and secured its patent on 1897.
• The William J. Jamison Co introduced the overly ornamented Shannon Twin Spinner in 1915 and was improved to create today’s spinner baits.
• In 1932, President Franklin D. Roosevelt instituted the creation of Tennessee Valley Authority and encouraged the creation and building of numerous dams. These dams were later used for culturing different varieties of bass fishes.
• Five years later, DuPont Company filed patent for nylon fishing net, this was later developed into nylon monofilament fishing line.
• The year 1992 is one of the most glorious events in the history of bass fishing. Larry Nixon, the famous fisherman in the history of bass fishing won $1 M total earnings for this sport on this year.
Bass Fish
Several fish species that are being caught in the bass fishing events are the following:
• Micropterus salmoides (Lacepede) - Largemouth Bass
• Micropterus dolomieui - Smallmouth bass
• Micropterus punctatus - Kentucky Bass
Other species of Micropterus are also caught but one that remains popular is the Largemouth bass. However, it should be emphasized that Australian Bass are different from the above North American Bass variants although most share similar features.
Perhaps, the most robust success of Bass Fishing was in the 1950s. The popularity of the game during this period is the springboard to the development of modern fishing equipments from bass boats, rods, lines, lures and various fishing gears.
Electronic gears were also incorporated among the host of equipments bass fishers used at that time. Reels of different types, which function in hauling and hoisting, were also created.
The contribution of bass fishing industry to the US economy records $50 to $70 Billion and the number continues to grow. Statistics show that the audience base of this sport is increasing and that more and more people are getting interested in it compared to tennis and golf.
Rabu, 13 Agustus 2008
Tips for Archery Fishing
Also known as Bow fishing, this is a sport wherein a fisherman uses archery equipment to fish.
A regular hunting bow can be used for fishing by simply attaching a reel to the front of the bow grip.
Archery fishing is especially favored by regular hunters when regular game like deer are off season. This way they can continuously hone their skills for whatever season it may be.
Before engaging in archery fishing, one must first take into consideration the following:
1. A fisherman must be duly licensed. Some states require that an individual have a state license to fish.
2. Equipment. Most states have a predetermined set of approved equipment for archery fishing.
3. Archery Safety Course. Still, some states require that an individual go through an approved safety course for archery fishing to ensure that the individual is well versed with the proper safety precautions and information regarding applicable laws in fishing.
4. Seasons. Bow fishing in some states can only be done in certain seasons. This is to allow the fish to spawn.
5. Species of fish. Some states have rules forbidding archery fishing for some species of fish.
The following skills are necessary for an individual to obtain and practice:
Knot tying. Though it may seem like a simple task, tying knots that will not slip (line for the arrow) are crucial in bow fishing.
Tuning. Tuning is making sure that the bow is at its best working condition. To ensure this, one has to continuously adjust the rest and calibrate the nock.
For a faster tuning process, one may shoot a regular bow-fishing arrow (without the tip) onto a target made of cardboard.
Marksmanship or targeting. Bow fishing and bow hunting, though similar on some aspects, really do differ on many things. Arrows for bow fishing are heavier, have larger arrow tips and, the most obvious one, has a string attached to the arrow.
And since fish are shot in the water, resistance differs as when compared to shooting in the air (for bow hunting of games)
There are various methods or ways of archery fishing. This includes the following:
1. Still hunting. A fisherman selects a place by the lake in which he would wait for passing fish to shoot its bow at.
2. Stalking. This can be done on foot or while on a boat. One is in constant motion in an attempt to locate fish.
3. Ambush. Fish that are best ambushed are the ones that are spawning since they tend to crowd thus increasing chances of target.
A regular hunting bow can be used for fishing by simply attaching a reel to the front of the bow grip.
Archery fishing is especially favored by regular hunters when regular game like deer are off season. This way they can continuously hone their skills for whatever season it may be.
Before engaging in archery fishing, one must first take into consideration the following:
1. A fisherman must be duly licensed. Some states require that an individual have a state license to fish.
2. Equipment. Most states have a predetermined set of approved equipment for archery fishing.
3. Archery Safety Course. Still, some states require that an individual go through an approved safety course for archery fishing to ensure that the individual is well versed with the proper safety precautions and information regarding applicable laws in fishing.
4. Seasons. Bow fishing in some states can only be done in certain seasons. This is to allow the fish to spawn.
5. Species of fish. Some states have rules forbidding archery fishing for some species of fish.
The following skills are necessary for an individual to obtain and practice:
Knot tying. Though it may seem like a simple task, tying knots that will not slip (line for the arrow) are crucial in bow fishing.
Tuning. Tuning is making sure that the bow is at its best working condition. To ensure this, one has to continuously adjust the rest and calibrate the nock.
For a faster tuning process, one may shoot a regular bow-fishing arrow (without the tip) onto a target made of cardboard.
Marksmanship or targeting. Bow fishing and bow hunting, though similar on some aspects, really do differ on many things. Arrows for bow fishing are heavier, have larger arrow tips and, the most obvious one, has a string attached to the arrow.
And since fish are shot in the water, resistance differs as when compared to shooting in the air (for bow hunting of games)
There are various methods or ways of archery fishing. This includes the following:
1. Still hunting. A fisherman selects a place by the lake in which he would wait for passing fish to shoot its bow at.
2. Stalking. This can be done on foot or while on a boat. One is in constant motion in an attempt to locate fish.
3. Ambush. Fish that are best ambushed are the ones that are spawning since they tend to crowd thus increasing chances of target.
Senin, 11 Agustus 2008
Alaska Fishing Lodge: The Nature’s Abode
Recreation is an important aspect in the life of human beings. Anglers represent the major group of leisure seekers, and have a determined advantage over the other groups who make use of nature’s wonderful creatures and elements for food.
Consequently, the popularity of fishing in many areas had continuously dominated the society. That is why along with its series of activities, people now realize the need for fishing lodges especially in places where fishing activities seem to never end.
Among all fishing lodges available in the industry today, the Alaska Fishing Lodges are among the most treasured and most popular fishing lodges in the United States.
The Alaska Fishing Lodge provides its customers full customer service satisfaction with their wide array of fishing activities and endless strings of fishing fun.
Normally, Alaska Fishing Lodges are made up of logs; sturdily build to provide each angler optimum convenience and comfort. It is known for its spacious interiors, creatively decorated with the right embellishments, thereby, setting the mood for fishing and wilderness.
In addition, because it carries the true Alaskan heritage, Alaska Fishing Lodges offer services and products that can be afforded by anyone. With its affordable rates, the place is inhabited by people, who mostly want to enjoy life and fishing but cannot afford to buy the pleasures in expensive beaches and lodges.
Best of all, Alaska Fishing Lodges are perfectly located in areas where the waters are abundant with the different species of fish. Usually, these lodges are situated in a place where trout, northern pike, and grayling mostly inhabit the waters.
On the other hand, most Alaska Fishing Lodges are built big enough to occupy 16 guests, in which each guest can avail of personal and individualized services.
Moreover, this type of lodge also houses a place where king salmon are abundant especially during the months of June and early part of July. Most lodges also provide a wide variety of fishing equipment, from rods to tackles and lines.
With all these beautiful features present in every Alaska Fishing Lodge, there is no better place to enjoy fishing and the wilderness like what this particular lodge can offer.
Staying in an Alaska Fishing Lodge is, indeed, an ultimate fishing experience.
Consequently, the popularity of fishing in many areas had continuously dominated the society. That is why along with its series of activities, people now realize the need for fishing lodges especially in places where fishing activities seem to never end.
Among all fishing lodges available in the industry today, the Alaska Fishing Lodges are among the most treasured and most popular fishing lodges in the United States.
The Alaska Fishing Lodge provides its customers full customer service satisfaction with their wide array of fishing activities and endless strings of fishing fun.
Normally, Alaska Fishing Lodges are made up of logs; sturdily build to provide each angler optimum convenience and comfort. It is known for its spacious interiors, creatively decorated with the right embellishments, thereby, setting the mood for fishing and wilderness.
In addition, because it carries the true Alaskan heritage, Alaska Fishing Lodges offer services and products that can be afforded by anyone. With its affordable rates, the place is inhabited by people, who mostly want to enjoy life and fishing but cannot afford to buy the pleasures in expensive beaches and lodges.
Best of all, Alaska Fishing Lodges are perfectly located in areas where the waters are abundant with the different species of fish. Usually, these lodges are situated in a place where trout, northern pike, and grayling mostly inhabit the waters.
On the other hand, most Alaska Fishing Lodges are built big enough to occupy 16 guests, in which each guest can avail of personal and individualized services.
Moreover, this type of lodge also houses a place where king salmon are abundant especially during the months of June and early part of July. Most lodges also provide a wide variety of fishing equipment, from rods to tackles and lines.
With all these beautiful features present in every Alaska Fishing Lodge, there is no better place to enjoy fishing and the wilderness like what this particular lodge can offer.
Staying in an Alaska Fishing Lodge is, indeed, an ultimate fishing experience.
Langganan:
Postingan (Atom)